Enhanced AverMedia live TV / capture support

[admin]

Enhanced AverMedia live TV / capture support

We are happy to announce that we released a new optimized AverMedia Live TV and capture support.
The enhanced AverMedia utility requirements are:

- Windows 7/8/10 or the latest version of Windows embedded that ships with our mediaBOX 200 and 300 64bit version
- Support S-Video input
- Support composite  input
- Pal / NTSC support via the command line flag: -videostandard pal / ntsc

You can now run the optimized AverMedia app instead of the entire mediaCENTER app.

To install and configure, simply download the file: http://www.digitalsignage.com/files/avermedia/AVerTVAPIandAP_v3.zip
Expand it to a directory on your Windows based mediaBOX player and set the path of the external app component and its flags as set below (composite | svideo) :



if you have any questions or need support please visit live chat:
http://chat.digitalsignage.com

regards

The DigitalSignage.com support team

[chrisgate]

Hi Admin,Nice to hear about the enhancement..........i need to specify PAL Mode or else most cable i used wont show.

specify like this /-source composite /-volume 99

Thanks

[admin]

have you tried adding: -videostandard pal / ntsc as command line flag?

[admin]

@chrisgate did it work for you?

[chrisgate]

No Sir, after adding the " /-videostandard pal " its not even loading avertv anymore.....the voice i used to hear gone.
If u have test it can u write everything in full from the source to volume to video standard.

[chrisgate]

Thanks ! the version three work....pls can u add setting to make the avermedia to be full screen.....it is part option in full version

[chrisgate]

Hi DS,
   Enhanced AverMedia live TV / capture support is making mouse cursor to always display on the screen....If the Avermedia is not in the campaign the mouse cursor will not display.

Can you look into it for me bcoz i am having complain on it.


Cheers

[crains]

hello admin -
thank you for this great app... i am having the same problem as chrisgate (Enhanced AverMedia live TV / capture support is making mouse cursor to always display on the screen)... this not acceptable... is there a fix or work around for this yet?

thanks -
chris rains

[admin]

please speak to live chat so they can assist,
regards

[crains]

hello admin -
 i spoke with live chat:

Department: Support
Full Name: chris rains
"cr@mediacontentadvantage"
Your Question: how do i make the cursor disappear when running the "Enhanced AverMedia live TV / capture support"
Staff: Ron P
09:59 Your Question: how do i make the cursor disappear when running the "Enhanced AverMedia live TV / capture support"
09:59 Please wait, an operator will be with you shortly.
10:00 You are now chatting with Ron P (Support Staff) - Support
10:00 Ron P: Hi, Ron here - how are you and how may I help you today?
10:00 Ron P: hello chris
10:00 chris rains: hello
10:01 Ron P: is the mouse attached to the player?
10:01 chris rains: no
10:01 Ron P: ok there shouldn't be a cursor then
10:02 Ron P: the player normally turns off the cursor during run
10:02 Ron P: but if a mouse is attached, then it shows when you move the mouse
10:03 chris rains: ok... where would i find the latest release of that app?
10:03 Ron P: "secure.digitalsignage.com/msgetstarted/#directDownload"
10:04 chris rains: thank you... have a great day!
10:04 Ron P: you're welcome chris
Support Center: "digitalsignage.com/support/upload/"

 and they did not resolve the mouse issue... i made sure there was no mouse attached and rebooted nuc from the studio app... also i could not find this app at the location provided... i have a screen capture of the issue if you would like it...

thanks
cr

[admin]

Driver downloads for the AVerTV Volar Hybrid Q - H837 can be found on the link below

http://www.avermedia.com/tv_more/download/avertv_volar_hybrid_q#ans_part

Unfortunately, the way AverTV designed this is when the mouse cursor is on top of Aver Media Center, it is always visible.  Some of our end users are using a 3rd party app that moves the mouse cursor to the corner at startup so it is unseen.  There is quite a few of them that would do the job just do a google search.

[crains]

hello admin -

thank you for your response... the mouse move workaround is working fine... just in case anyone else is interested the one i am using is at "movemouse.codeplex.com "

cr

[chrisgate]

does it work window 7?