December 15, 2017, 02:25:05 AM
Welcome, Guest. Please login or register
News: Stay up to date with everything that's happening at http://plus.digitalsignage.com

MediaSignage support forum



Author Topic: Small Player window after a while!  (Read 1078 times)

HVL

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Small Player window after a while!
« on: March 08, 2017, 04:36:01 AM »
Hello all

Have a client with a bug I havnt seen before.

Then machine normally runs fine but after a while it does this

http://imgur.com/f8XvNuI

If I log on to the machine with teamviewer, run it full screen and then tab in out of the Player it goes back to full screen and works again without any problems..
So its not the Player that crashes.

Not really sure where to begin on this problem. If its a player bug or a windows feature I need to turn on/off.

And was wondering if others have had this problem and maybe found a solution..

Currently running win7 and version 5.0.68 on the machine.

thnx in advance.

Regards

HVL

topangan

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
    • View Profile
Re: Small Player window after a while!
« Reply #1 on: March 08, 2017, 08:56:14 AM »
I have been using teamviewer for years and have not seen that before.  what version of teamviewer are you using?  Do you have other players with the same setup with the same problem?

HVL

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Re: Small Player window after a while!
« Reply #2 on: March 14, 2017, 06:04:32 AM »
For years it has never been a problem for us.

We started with 1 machine. now its up to 2.

Both running Win7 and ver. 5.0.68..


HVL

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Re: Small Player window after a while!
« Reply #3 on: March 15, 2017, 05:11:56 AM »
Tried updating to latest version. Will see if that solves the problem.

Strange problem tho, since we have never seen it happen to any other clients.

HVL

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Re: Small Player window after a while!
« Reply #4 on: March 20, 2017, 06:08:48 AM »
Still same problem.. seems to happend after 48 hours.

Not a new client.
No new machine has been installed..

Just started happening.. now it wont go away !



admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 4737
  • Karma: +35/-8
    • View Profile
Re: Small Player window after a while!
« Reply #5 on: March 24, 2017, 06:32:04 AM »
Could be a hardware problem, try changing cables.

HVL

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Re: Small Player window after a while!
« Reply #6 on: March 29, 2017, 04:04:04 AM »
Have been out changeing hardware, will have to wait and see if it continues.

HVL

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Re: Small Player window after a while!
« Reply #7 on: March 31, 2017, 05:17:04 AM »
Changed machine but not cables problem gone.

Tested machine here again for days.. Never got the problem. So why will stay in the unknown :)

Doc

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Small Player window after a while!
« Reply #8 on: October 26, 2017, 05:25:41 PM »
Sorry I did not see this sooner, but I know what this is. I have a couple of players at locations where the customer insists the signage screen works on a power timer and turns off at night. The players are Win7 laptops that have 1366 x 768 resolution screens.  The players continue playing 24/7 because laptop bios doesn't provide for scheduling power on times, and I push all updates at night in case there are problems. So when the 1080p signage display powers down for the night, the laptop shifts to the native1366x768 resolution. Sometimes when the signage screen powers on in the morning, it isn't recognized properly by the laptop, and generates instead what you are seeing. If I reboot the laptop it recognizes the powered up signage screen, adapts to 1080p and all is well. I hate this problem, and the only workaround I've come up with is to schedule signage player to reboot the player one minute after the screen is scheduled to turn on. It's a pain in the ass but it works. Hope this helps. Daniel

steveRedMinnow

  • Newbie
  • *
  • Posts: 32
  • Karma: +0/-0
    • View Profile
Re: Small Player window after a while!
« Reply #9 on: October 27, 2017, 08:14:11 AM »
Doc,

you may want to look into getting an EDID generator. EDID data exchange is a standardized means for a display to communicate its capabilities to a source device, letting it know what resolution it wants to display. An EDID generator is a small piece of hardware that connects between the laptop and the video display that always sends that resolution information. So even if the video display is turned off, the laptop still thinks it is on and is looking for a 1080p signal.

We have used them many times and they have solved headaches like the one you have. Definitely worth the $40-80 price tag!

Overview of EDID: https://www.extron.com/company/article.aspx?id=uedid

Here are 2 I found with a quick Google search:
https://www.monoprice.com/product?p_id=14106&gclid=CjwKCAjwssvPBRBBEiwASFoVd1Y4KmGZPuh1exHR3ILbSbs7NGspxhd5h4C4rXZNYtUcgxvrGZ5ivBoCTb4QAvD_BwE

https://www.bhphotovideo.com/bnh/controller/home?A=details&O=&Q=&ap=y&c3api=1876%2C%7Bcreative%7D%2C%7Bkeyword%7D&gclid=CjwKCAjwssvPBRBBEiwASFoVdzSyU3YO2i8e4YnzoxQu0ij-9Jk2YHv1inP57e7H8Mlezf4-oJIz-hoCmeYQAvD_BwE&is=REG&sku=1204952

 

Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines