It's shown as a green outline, and it WILL do a screen capture.
These are all Win7 (Embedded) systems with the bad watchdog behavior.
My Androids are all functioning OK in this manner.
The issue isn't that it's reporting back wrong, it's not functioning properly when haloed.
When any of my devices are "HALOED" (Green Circle) those devices will not "REBOOT" as scheduled in the Station-Properties under "Reboot Conditions".
All of the Solid Green Circle devices reboot normally every day as scheduled...Green haloed Circles do not.
In fact those devices will show that they have been ON for days/weeks without a reboot.
If I manually reboot them, some come up as HALOS, some SOLID...but it's random with the same device.
The only think I CAN say is that when I used the "AIR" version of the Signage Player, this was never an issue.
Switching to EXE version, this issue is persistently random....but definitely existent.
Some of these devices have been rebuilt/reinstalled many times to try to alleviate the issue to no avail.
I've gone to the extent of reinstalling the OS on many of these, and starting from scratch, but the issue remains.
>>>To me - the EXE version of the watchdog is not as stable as the AIR version.
The AIR version was VERY persistent, it would FORCE load itself even if you closed the application manually.
The EXE version does not perform this way & in my opinion is NOT a persistent application.
I'll do/test what you want me to...but I've really done everything I can think would cause this; outside of a CODING error within watchdog.
Please advise,
-StarVue
