January 19, 2022, 12:06:40 PM
Welcome, Guest. Please login or register
News: Stay up to date with everything that's happening at http://plus.digitalsignage.com

MediaSignage support forum



Author Topic: mediaDROID-90 Upside Down  (Read 4191 times)

heybucko

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
mediaDROID-90 Upside Down
« on: July 29, 2014, 03:56:59 PM »
Just installed the mediaDROID-90 on my Samsung monitor and the interface is upside down- strange because the monitor orientation is correct for other inputs.

Live chat said there was no way to reverse the orientation via the software, but thought I'd reach out and see if anyone had a solution before I return the hardware. Changing the monitor's physical orientation is out of the question because I occasionally need to use the other inputs. I checked to see if there's a way to reverse the orientation using the monitor's internal menu, but no luck on that either.

Many thanks!

admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 5141
  • Karma: +35/-8
    • View Profile
Re: mediaDROID-90 Upside Down
« Reply #1 on: July 29, 2014, 05:00:24 PM »
did you order the vertical mode? you can send back to exchange it to horizontal if you need to...

heybucko

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: mediaDROID-90 Upside Down
« Reply #2 on: July 30, 2014, 11:59:45 AM »
Yes, ordered the vertical mode, it's just upside down. If I flipped the monitor exactly 180 degrees, it would be right side up.

JMH

  • Full Member
  • ***
  • Posts: 203
  • Karma: +4/-0
    • View Profile
Re: mediaDROID-90 Upside Down
« Reply #3 on: July 31, 2014, 06:26:58 AM »
Never flip the monitor upside down, it can cause failure to the monitor. Besides, most monitors don't support an angle of more than 15 degrees. Keep that in mind, so you will enjoy your digital signage without changing monitors all the time ;)

 

Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines