July 15, 2020, 07:00:43 AM
Welcome, Guest. Please login or register
News: Join us for a FREE Webinar this Thursday at http://webinar.digitalsignage.com

MediaSignage support forum



Author Topic: Presentation will resume after power savings?  (Read 2128 times)

dstech

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Presentation will resume after power savings?
« on: September 10, 2013, 05:44:49 AM »
We turned on the power saving for the monitor on our mediaPlayer 200 at nights.  However now when we come in, the player shows over half the screen the display of "digital signage presentation will resume momentarily".

Short of turning off power savings, there's got to be a way of working around this right?

It seems the ONLY way to get it working correctly again is to reboot the whole player??
« Last Edit: September 10, 2013, 05:46:36 AM by dstech »

dstech

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: Presentation will resume after power savings?
« Reply #1 on: September 11, 2013, 07:52:01 AM »
If this can't be fixed, then please add the ability to define a restart time for each day the same way that the power savings mode can be defined for each day.

That way I can set a restart to occur 1 minute after the power saving period for each day.

 

Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines