October 14, 2019, 11:50:17 AM
Welcome, Guest. Please login or register
News: Stay up to date with everything that's happening at http://plus.digitalsignage.com

MediaSignage support forum



Author Topic: Power Saving Version 4.x - for Monitor does not work  (Read 1479 times)

ynndss

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Power Saving Version 4.x - for Monitor does not work
« on: November 08, 2012, 05:25:14 PM »
Version 3.x power saving worked as expected. Set time for a monitor to turn off and the video signal would stop.
Version 4.x stops the player but keeps the white status box displayed on screen - this causes burn in and does not let the screen enter its sleep mode.

ynndss

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: Power Saving Version 4.x - for Monitor does not work
« Reply #1 on: November 08, 2012, 06:07:07 PM »
Problem is inconsistant. In one day all monitors showed white MS status box - controller running and server connected. Status of player was Ready (after time power saving was to start) video signal still being displayed. Tested anotehr unit - changed time - worked.
Not sure why all units that should had been off still had white status box being displayed when signal should had been off.

 

Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines