December 02, 2023, 08:13:37 PM
Welcome, Guest. Please login or register
News: Join us for a FREE Webinar this Thursday at

MediaSignage support forum

Author Topic: remove spacing tool ignores 2nd-screen offset start position  (Read 4430 times)


  • Jr. Member
  • **
  • Posts: 30
  • Karma: +0/-0
if timeline has mutltiple screens and the remove spacing tool is used.

all resources within the timeline that are assigned to the 2nd screen are repositioned back to the 0 offset mark of the entire timeline, not the start point of the 2nd screen.

while this may sound trivial, its a major pain in the ars, after you've gotten used to using the tool. which is quite handy, especially when inserting new resources/scenes into an already tight timeline.

logically, if you choose not to reposition the first element in any channel timeline would fix it, although the slick fix is to observe what screen that channel is attached to, and set its start point to the screens starting offset.

« Last Edit: June 16, 2009, 06:15:13 AM by MAW31 »


  • Administrator
  • Hero Member
  • *****
  • Posts: 5185
  • Karma: +36/-8
Re: remove spacing tool ignores 2nd-screen offset start position
« Reply #1 on: June 17, 2009, 06:19:12 AM »
I agree, and this is something we will improve on.
The Studio will get a TON of tools as soon as we are done with release 1.7 ( release 1.5 is due this week ).
After 1.7, we will add copy / paste / cut to the WHOLE system, including Undo, duplicates and MUCH more...
If only there were more hours in a day :)



Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines