December 06, 2023, 05:57:33 AM
Welcome, Guest. Please login or register
News: Stay up to date with everything that's happening at http://twitter.digitalsignage.com

MediaSignage support forum



Author Topic: Station Disconnects  (Read 354 times)

hurfordc

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Station Disconnects
« on: September 28, 2023, 01:19:57 PM »
I have an issue that when the station goes green and I click to get a snapshot it turns yellow and nothing happens. Sometimes it turns red.
I got lucky and got it to work one time. My other 4 signs work fine with the same setup.

topangan

  • Full Member
  • ***
  • Posts: 77
  • Karma: +5/-0
Re: Station Disconnects
« Reply #1 on: October 05, 2023, 08:30:39 AM »
There are a few steps you can take to narrow down the problem. Change the ethernet cable (if you are using a hardline). These can be an issue at times.  Next check the internet by connecting another device to the ethernet cable to see if you get the same intermittent behavior.  We had a device that was experiencing this very same issue and it turned out to be the cable in the wall.

 

Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines