February 21, 2024, 06:54:10 AM
Welcome, Guest. Please login or register
News: Stay up to date with everything that's happening at http://plus.digitalsignage.com

MediaSignage support forum



Author Topic: mediadroid+ screen resolution  (Read 675 times)

PieterDM

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
mediadroid+ screen resolution
« on: September 19, 2023, 12:45:47 AM »
I have a problem with the mediadroid+ reolution.

my display only accepts 1024x768 resolution, 60Hz on a hdmi input. When i connect a laptop, it works fine. When I connect the mediadroid+ it doesn't display anything. It keeps getting stuck on the startup logo (AI S922X logo). How can i adjust the reolution of the mediadroid x to 1024x768?

admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 5189
  • Karma: +36/-8
Re: mediadroid+ screen resolution
« Reply #1 on: September 22, 2023, 08:40:45 AM »
can you try the unit on another display preferably a 1080p display. this is to check if the unit is working.  if it works, go to Settings | Device Preferences | Display and set the resolution to 1024x768

the unit should not get stuck at the startup logo irregardless of the display.  how is the unit powered? it requires 12v 3a

best regards

-ADMIN

 

Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines