February 24, 2024, 05:21:48 PM
Welcome, Guest. Please login or register
News: Stay up to date with everything that's happening at http://twitter.digitalsignage.com

MediaSignage support forum

Author Topic: Video wall low resolution problems  (Read 1742 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Video wall low resolution problems
« on: April 14, 2022, 12:37:35 PM »
Hey! Me and my friends did a video wall project last year. We are total newbies and some things went..not wrong but could have gone better and I wanted to ask this forum if you may have any tips for us, to improve what we already have. We know that you can spend a looot of money on these things but we were on a budget and now we're kind of "suffering the consequences".

So we built a mobile exhibitions space last year including a video wall consisting of six Hisense 70AE7010F TVs (70 inches each). We placed them vertically on three walls in a U-Shape, two on each wall and a company connected them all with a set up of a media player, a LAN switch and each tv had its own receiver where the signal was send to. So the media player split the one video we put in into six pieces.What happened, and what we did not see coming , was, that even though these TVs are 4K we can only show hd on them now and since these are normal TVs and no expensive digital signage displays, I was told afterwards, that the pinq rate is not high enough for everything to look smoothely because you can see a little delay where the tvs touch. This is also something we only noticed after everything was paid for and set up.

Maybe you have some advice for me, is there any way, to improve the quality of the tvs to at least full hd?We sat down again this year and thought maybe there's even a simpler way to do this. Maybe you could export the Video in 6 parts, that will fit the format of each TV on portrait mode. Put a USB flash drive into each TV rotate the video and, I don't know if this is possible, but sync them somehow so you can start each video at the same time?

Do you think, ths idea could work and do you know a way, to sync the TVs, not with them playing the same video but different videos? or do you think we should stick to the first set up or is there a way to improve this set up? if you need more technical details, I could add them later!

I would be very thankful for any advice!Sorry if my English has some flaws, I'm from Germany :)

I could not figure out how to insert an image but you can find the project on instagram "zwo70.art"


  • Jr. Member
  • **
  • Posts: 22
  • Karma: +0/-0
Re: Video wall low resolution problems
« Reply #1 on: April 15, 2023, 04:22:32 PM »
I saw your post and clicked on it out of curiosity. I don't have any suggestions since I've never done something like this before. I went to your Instagram page and looked at your video wall and I think it looks good.
Did you figure out a solution?


Carbonate design by Bloc
variant: carbon
SMF 2.0.12 | SMF © 2016, Simple Machines